The QUEEN series UPS, provides high performance but inexpensive power protection solution for most business applications with
critical file servers, network switches, hubs and small computers. The QUEEN series is available in a variety
of models: 1000VA - 1500VA - 2000VA and 3000VA.
PRINCIPLES OF WORKING
In normal condition, the load is fed by a stabilized line with the automatic AVR and filtered by over voltages with EMI filters.
In mains failure condition, the QUEEN series UPS feed the load with a sinusoidal wave through the battery energy; the software,
included in the envelope, controls the planned system shutdown. If an overload or a fault occurs, the electronic by-pass provides
not to cut the users feeding.
|
|
FEATURES
. Sine wave output
. Nearly zero transfer time
. User friendly LCD display for measurements and alarms
. 97% high efficiency in normal mode and reduces noise and heat generated by other topology UPS
. AVR Boos & Buck. Automatically corrects either under or over voltage condition without unnecessary battery drain and extends the battery's life
. Easy swappable battery function
. Advanced battery management prevents deep discharge of the built-in battery during a power failure
. Cold start function. Enables to turn on the UPS without connecting to the Utility
. Plug & Play design
. RS232 and USB communication interfaces
LED
Utility Normal, Backup Mode, & Fault
LCD with White Backlight Bypass, Boost, Buck, UPS, Battery Low/Replace/Fault, Site Wiring Fault, Overload, UPS Fault,
Load Level, Battery Level
Keypad
Turn-on/Alarm Reset/Self-test, Turn-off, Reading Scroll
|